TPMS Service Operations
Check Operations
59
NOTE
: With Ford sensors, the tablet should be held 180 degree away from
the stem. Please refer to the user manual from the vehicle maker.
5.3 Programming Operations
The programming function is used to program the sensor data to the
MX-Sensor and replace the faulty senor (poor battery life or malfunction). The
MaxiSys MS906TS is easy to use with a proven efficiency and guaranteed
accurate results.
There are four options available when programming MX-Sensor using the
Display Tablet: Copy by Activation, Copy by OBD, Auto Create, and Manual
Create.
Figure 5- 4
Sample Programming Function Screen
Main Section
Column 1 – displays wheel positions
Column 2 – displays the new created sensor IDs
Column 3 – displays the retrieved sensor IDs by activation or by OBD
NOTE
: Programming function will only work with Autel’s MX-Sensor. Currently,
there are two models available: Clamp-in Sensor and Snap-in Sensor, both
with two types, one in orange color with 433MHz frequency, and one in dark
gray color with 315MHz frequency. The Clamp-in Sensor is taken as an
example in this manual. Please choose the proper MX-Sensor when
programming.
