67
Tap
Copy by Input
.
When the input box displays, enter the ID of the original
sensor. Tap inside the input box to display a soft keyboard. Once displayed,
input the ID and tap
Enter
when finished.
Sensors either have a hexadecimal format or a decimal format. A warning
message will display if too many characters are entered.
The
Copy by Input
programming method uses the ID of the original sensor
that is already stored within the TPMS ECU and therefore does not require
the sensor be relearned if the new programmed sensor has been put in the
same position.
Auto Create
The
Auto Create
function is used to automatically create a random sensor
ID to program a new MX-Sensor.
To use this function, there is no need to activate the original sensor or retrieve
the original sensor IDs from the TPMS ECU.
Select the vehicle model, select a wheel location on the display and place a
MX-Sensor near the top right corner of the tablet. Tap
Auto Create
to
program the new MX-Sensor.
A random ID will be created for the MX-Sensor. This new ID differs from the
ID stored in the TPMS ECU, therefore the sensor will have to be relearned to
the TPMS ECU.
Figure 5-22
Sample Copy by Input Screen
