Autel MaxiDAS DS808TS Manual Download Page 120

Page: 120 / 167

113

4. Or, tap the vehicle record thumbnail to view record.

5. A Historical Test record displays, check the recorded information of

the test vehicle, and tap the Diagnostics button on the upper right
corner.

6. The vehicle

’s Diagnostics screen displays a new diagnostic session,

see

Diagnosis

on page 27 for detailed instructions on vehicle

diagnostic operations.

Historical Test Record

The Historical Test record sheet is a detailed data form that includes general
vehicle information such as vehicle year, make and model. The form also
includes retrieved DTC from previous test and all information manually
inputted by the technician.



To edit the Historical Test record sheet

1. Tap the

Shop Manager

application on the MaxiDAS Job Menu.

2. Select

Vehicle History

3. Select the specific vehicle history record thumbnail from the main

section. The Historical Test record sheet displays.

4. Tap the

Edit

button to start editing.

5. Tap on each item to input the corresponding information or add

relevant files or images.

Figure 8-2

Sample Historical Test Record Sheet

Summary of Contents for MaxiDAS DS808TS








































































































































































Search results

Summary of Contents for MaxiDAS DS808TS

Reviews:

Related manuals for MaxiDAS DS808TS

Brands by name

Popular brands

Autel MaxiDAS DS808TS, Manual

Search results

Summary of Contents for MaxiDAS DS808TS

Reviews:

Related manuals for MaxiDAS DS808TS

Brands by name

Popular brands