66
When the programming is complete, the programmed ID will display in the
column to the right of the wheel designation. In the pictured example, the new
ID is displayed to the right of the FR column.
By using
Copy by OBD
, the sensor ID that is retrieved from TPMS ECU is
programmed to the new MX-Sensor.
There is no need to perform the
Relearn
function to write the ID into the ECU
when the new programmed sensor has been put in the same position.
The
Copy by OBD
programming method, if available, is recommended to
program new MX-Sensors as there is no need for Relearn.
Copy by Input
The
Copy by Input
allows users to program a new MX-Sensor with the ID of
an original TPMS sensor.
Select a wheel location on the display and place a MX-Sensor near the top
right corner of the tablet and then tap
Copy by Input
to program the new MX-
Sensor.
Figure 5-21
Sample Copy by OBD Screen
