Autel MaxiDAS DS808TS Manual Download Page 132

Page: 132 / 167

125

Job Menu. Or tap another setting to adjust.

Printing Setting

Configure this option to enable the tablet to print through a specified network.



To setup the printer connection

1. Tap the

Settings

application on the MaxiDAS Job Menu.

2. Tap the

Printing Setting

option on the left column.

3. Tap the

Print via Network

to activate the printing function, enabling

the device to send files to the printer through the networked PC via
Wi-Fi connection.

4. Tap the

Home

button on the top left corner to return to the MaxiDAS

Job Menu, or tap another setting to adjust.

Printing via APP

DS808TS can print to Wi-Fi printer via a downloaded app.

On the tablet, click on the

Print

button of a saved file and the file will print to

the connected printer.

Figure 10-3

Sample Printing Setting Screen

Summary of Contents for MaxiDAS DS808TS








































































































































































Search results

Summary of Contents for MaxiDAS DS808TS

Reviews:

Related manuals for MaxiDAS DS808TS

Brands by name

Popular brands

Autel MaxiDAS DS808TS, Manual

Search results

Summary of Contents for MaxiDAS DS808TS

Reviews:

Related manuals for MaxiDAS DS808TS

Brands by name

Popular brands