94
[1] Enter New Value for Adjustment
From the
Starting Basic Inspection Quantity
menu, tap
[1]
and the screen
displays as below.
After entering the value, tap
OK
to save the value to the tool. Tap
ESC
to exit
the operation.
NOTE
The data you input should be in the given range. If the input data is out of
range, the tool will display a warning message “Permissible adjustment range
exceeded.”
[2] Reset Adjustment to 0
Once the
[2]
is tapped, the tool will automatically reset the value to zero.
[3]/[4] Store Data and Exit
When the fuel delivery rate adjustment is completed, tap
[3]
to store the new
value in the control units; or, select
[4]
and
OK
to retain the old value.
Injection Rate
This function is used to adjust the injection volume.
1. Tap
Injection Rate
from the service functions menu to enter the service
screen.
Figure 6-23
Sample Enter New Value Screen
