Aurora Multimedia WACI NX Jr. Reference Manual & Programming Manual Download Page 40

Page: 40 / 180

Date / Time

The current date and time is displayed. You may also set the date and time using the pull-down menus.

Once you have made new selections, use the “Set Date and Time” button next to the pull-downs to save

the new date and time.

Time Zone

The time zone setting is used when the WACI communicates with outside computers and servers. Setting

the time zone also allows the WACI to appropriately apply corrections for Daylight Savings Time. You

can set the active time zone by simply choosing one from the list of time zones.

Check the “Automatically adjust for Daylight Savings” check box to have the clock automatically

adjusted when the system enters or leaves Daylight Savings Time.

Summary of Contents for WACI NX Jr.





















































































































































































Search results

Summary of Contents for WACI NX Jr.

Reviews:

Related manuals for WACI NX Jr.

Brands by name

Popular brands

Aurora Multimedia WACI NX Jr., Reference Manual & Programming Manual

Search results

Summary of Contents for WACI NX Jr.

Reviews:

Related manuals for WACI NX Jr.

Brands by name

Popular brands