Aurora Multimedia WACI NX Jr. Reference Manual & Programming Manual Download Page 105

Page: 105 / 180

105

Parameters

SubnetMask

[out, retval] String containing the current subnet mask of the device, such as “255.255.255.0”.

Net_GetSubnetMaskEx ( NetCard )

Returns the current subnet mask of the network interface specified.

Syntax

HRESULT Net_GetSubnetMask(
[in] long NetCard
[out, retval] BSTR* SubnetMask
);

Parameters

NetCard [in] The ID of the netcard to get the subnet mask from

SubnetMask

[out, retval] String containing the current subnet mask of the device, such as “255.255.255.0”.

Net_PostHtmlData ( Url, PostData )

Sends data to a web server on port 80 via the HTML post mechanism.

Syntax

HRESULT Net_PostHtmlData(
  [in] BSTR Url,
  [in] BSTR PostData,
  [out, retval] BSTR* RetData
);

Parameters

Url

[in] The server address to post to, e.g.

http://waci/rpc

PostData

[in] A string that represents the data to send to the server.

RetData

[out, retval] The response send back from the server.

Net_PostHtmlDataEx (

Net_PostHtmlDataEx ( NetCard,

NetCard,

NetCard, Url, IsExpression, PostData, Timeout )

Url, IsExpression, PostData, Timeout )

Sends data to a web server. This function is similar to Net_PostHtmlData, but includes two additional
parameters.

Net_PostHtmlDataEx

supports expressions and a timeout value.

Syntax

HRESULT Net_PostHtmlDataEx(
  [in] long NetCard
  [in] BSTR Url,
  [in] long IsExpression,
  [in] BSTR PostData,
  [in] long Timeout,
  [out, retval] BSTR* RetData
);

Parameters

NetCard [in] The ID of the netcard to get the subnet mask from

Summary of Contents for WACI NX Jr.





















































































































































































Search results

Summary of Contents for WACI NX Jr.

Reviews:

Related manuals for WACI NX Jr.

Brands by name

Popular brands

Aurora Multimedia WACI NX Jr., Reference Manual & Programming Manual

Search results

Summary of Contents for WACI NX Jr.

Reviews:

Related manuals for WACI NX Jr.

Brands by name

Popular brands