Aurora Multimedia WACI NX Jr. Reference Manual & Programming Manual Download Page 109

Page: 109 / 180

109

Parameters

Netcard

[in] ID of network port to use.

Read

[out, retval] Returns the data in the buffer.

Telnet_ClearReadBuffer ( NetCard )

Clears the telnet buffer of the specified network port.

Syntax

HRESULT Telnet_ClearReadBuffer(
[in] long NetCard,
[out, retval] VARIANT_BOOL* Success
);

Parameters

Netcard

[in] ID of network port to use.

Success

[out, retval] Returns TRUE if buffer was cleared successfully.

Telnet_ReadBufferCount ( NetCard )

Counts the number of characters in the buffer.

Syntax

HRESULT Telnet_ReadBufferCount (
[in] long NetCard,
[out, retval] long* Count
);

Parameters

Netcard

[in] ID of network port to use.

Count

[out, retval] Number of characters in the buffer.

Buzzer Methods

Buzzer_On ( )

Emits a beeping noise from inside the WACI.

Syntax

HRESULT Buzzer_On (
[out, retval] VARIANT_BOOL* Success
);

Parameters

Success

[out, retval] Returns TRUE if the buzzer was turned on.

Buzzer_Off ( )

Emits a beeping noise from inside the WACI.

Summary of Contents for WACI NX Jr.





















































































































































































Search results

Summary of Contents for WACI NX Jr.

Reviews:

Related manuals for WACI NX Jr.

Brands by name

Popular brands

Aurora Multimedia WACI NX Jr., Reference Manual & Programming Manual

Search results

Summary of Contents for WACI NX Jr.

Reviews:

Related manuals for WACI NX Jr.

Brands by name

Popular brands