Aurora Multimedia WACI NX Jr. Reference Manual & Programming Manual Download Page 22

Page: 22 / 180

NX----STREAM

STREAM

• Encodes and Decodes MPEG2 and MPEG4 in high and standard definition

• MJPEG at 1280 x 1024 @ 60Hz

• H.263, H.264 Capability

• Composite Video Input and Output, supports NTSC/PAL/SECAM

• S-Video Input and Output, supports NTSC/PAL/SECAM

• YPBPR Input and Output

• HDMI Input and Output

• SPDIF Input and Output

• Standard 40GB hard drive storage with options up to 120GB

• L/R RCA Audio Pair Input and Output Connections

• Controlled via WACI NX Event Manager and Content Manager

• Create play-lists and automate media delivery

NX----HDD

HDD

• Can be ordered with up to 120GB of hard drive storage capacity

• Storage of web pages, audio, video, or almost anything that can be served up

• Local data logging storage

• Content handling via WACI NX Event Manager

Summary of Contents for WACI NX Jr.





















































































































































































Search results

Summary of Contents for WACI NX Jr.

Reviews:

Related manuals for WACI NX Jr.

Brands by name

Popular brands

Aurora Multimedia WACI NX Jr., Reference Manual & Programming Manual

Search results

Summary of Contents for WACI NX Jr.

Reviews:

Related manuals for WACI NX Jr.

Brands by name

Popular brands