Aurora Multimedia WACI NX Jr. Reference Manual & Programming Manual Download Page 137

Page: 137 / 180

137

Syntax

HRESULT GetEventCount(
[out, retval] long* NumEvents
);

Parameters

NumEvents

[out, retval] Total number of Events in the system.

Remarks

This function is used in conjunction with GetEventByIdx to get a list of the available Events.

GetEventGroup ( EventId )

Returns the group name for the Event with a specified ID.

Syntax

HRESULT GetEventGroup(
[in]long EventId,
[out, retval]BSTR* Group
);

Parameters

EventId

[in] ID of the Event.

Group

[out, retval] A returned string filled in with the group for the specified Event.

GetEventNetCard ( EventId )

Returns the group name for the Event with a specified ID.

Syntax

HRESULT GetEventGroup(
[in]long EventId,
[out, retval]BSTR* Netcard
);

Parameters

EventId

[in] ID of the Event.

Netcard

[out, retval] The ID of the Network port the event is assigned to.

Remarks

If the NetCard is 0, that means it can be triggered by any network port.

GetEventHost ( EventId )

Returns the remote host name of the Event with a specified ID.

Syntax

HRESULT GetEventHost(
  [in]long EventId,
  [out, retval]BSTR* Host
);

Summary of Contents for WACI NX Jr.





















































































































































































Search results

Summary of Contents for WACI NX Jr.

Reviews:

Related manuals for WACI NX Jr.

Brands by name

Popular brands

Aurora Multimedia WACI NX Jr., Reference Manual & Programming Manual

Search results

Summary of Contents for WACI NX Jr.

Reviews:

Related manuals for WACI NX Jr.

Brands by name

Popular brands