Aurora Multimedia WACI NX Jr. Reference Manual & Programming Manual Download Page 52

Page: 52 / 180

DSP Diagnostics

SP Diagnostics

Digital I/O is available on the WACI NX+ only.

Each port may be configured and tested as:

•

A/D Analog to Digital (-5v to +5v) 12 bit (0 to 4096)

•

D/A Digital to Analog (-5v to +5v) 16 bit (0 to 65536)

•

Digital Input (0 to 5v)

•

Digital Output (Open Drain sink up to 200ma)

When the state of the port is “High”, the LED light will be on otherwise if it is an A/D or D/A the LED

will vary intensity based on level.

Log Files

Log files for the WACI servers are available for both the WACI + and the WACI NX Jr. An admin may

review or clear (reset) the logs from this page:

Summary of Contents for WACI NX Jr.





















































































































































































Search results

Summary of Contents for WACI NX Jr.

Reviews:

Related manuals for WACI NX Jr.

Brands by name

Popular brands

Aurora Multimedia WACI NX Jr., Reference Manual & Programming Manual

Search results

Summary of Contents for WACI NX Jr.

Reviews:

Related manuals for WACI NX Jr.

Brands by name

Popular brands