Page
28
of
34
9000002601.doc
Assembly Instructions
•
Spindle Drive SP -24 V / 230 V
NOTICE
Once the mounting has been completed, the health and safety requirements set out in the
Machinery Directive MD 2006/42/EC
must be adhered to.
WARNING
Where windows are within easy reach (below a distance of 2.5 m from
the bottom edge of the window to the finished floor) the
warning sign
must be clearly attached on
the casement or on the frame!
Furthermore, the installer of the power-operated window must carry out a risk assessment.
The protection class for the window specified by the project planner must be complied with!
Consideration of the safety
and operational test
Activation
element
Check safety of assembled system
- Connect control voltage
- Check fasteners (brackets, mounting brackets) and
tighten as necessary
Perform operational test
- Visual inspection of casement movements
- Immediately stop the system in case of malfunction
- Make sure there are no collisions with the facade construc-
tion and, if necessary, take corrective measures or
re-configure the drives
24V DC
Activation
element
OPEN
CLOSE
230V AC
Never connect drives
directly to 230 V AC
power supply
A
in
24 V DC
OPEN
CLOSE
Check safety of assembled system
- Connect control voltage
- Check fasteners (brackets, mounting brackets) and
tighten as necessary
Perform operational test
- Visual inspection of casement movements
- Immediately stop the system in case of malfunction
- Make sure there are no collisions with the facade construc-
tion and, if necessary, take corrective measures or
re-configure the drives
18
