Assembly Instructions
•
Spindle Drive SP -24 V / 230 V
9000002601.doc
Page
13
of
34
7
Spindle drive SP 8-Z xxx in 230 V AC
Detail drawing / Overview / Technical Data
Operating Parameters
Rated voltage:
“U”
Cut-off current:
“I”
Max. pressure force:
“F”
Max. pulling force:
“F”
Stroke:
“s”
230 V AC, 50 Hz (+ / - 20%)
approx. 0,2 A
800 N
800 N
300 to 750 mm 5 %
+
Stroke speed
with 2/3 nominal load:
8,5 mm/s
IP 54
30%
not possible
- 5°C bis +75°C (E
)
nvironmental Class I
opening against nominal load / closing with nominal load support
Enclosure protection:
Duty ratio (for 10min):
“ED”
Synchronouse mode:
Ambient temperature range:
General performance:
see dimension sheet
Installation length
„L“
Technical description / product features
Silver anodized aluminium body (E6/C-0)
Robust aluminum spindle
Maintenance-free (drive)
RAL colour finish possible
Versions
=
and
Standard
has internal disconnection via end switches and disconnection at overload
with additional potential free contact CLOSE
Parallel operation up to max. 8 drives possible
Floating contact „Z“ for closed position-optional
PVC connection cable, length approx. 1m
* Please refer to the
for technical information on the individual drive versions
Technical Data Sheets
Cable version: 6 x 0,75 mm²
Dimension Sheet SP 8-Z xxx in 230 V AC
AK 1m
Stroke „s“
Ø
16
Ø
8
L=
s + 190mm
17
54
25
72
14
43
76
22
Clamping area
„KLB“
2/3 KLB
1/3 KLB
Ø
6
17
23
+/- 8,0
L
= min. 490 ( s = 300mm )
Drive is not suitable for direct switch-over of the running direction
Eye bolt for fixing
(
(glued in by factory)
512002)
ord.no.
1
1
not supplied
i
