Page
34
of
34
9000002601.doc
Assembly Instructions
•
Spindle Drive SP -24 V / 230 V
Warranty and After-Sales Service
Warranty and After-Sales Service
Basically our
„General Terms and Conditions of Goods
and Services by the Electrical Industry”
issued by the
Central Association of the Electrical Engineering and
Electronics Industry (ZVEI) are applicable.
This warranty complies with legal requirements and applies
to the country in which the drive was purchased.
The warranty covers material and manufacturing faults that
occur during normal use of the products.
The warranty period for materials supplied is 12 months
from the date of delivery.
Warranty and liability claims with damages to property and
persons will be excluded if they are due to one or several
of the following causes:
•
Improper use of the drive.
•
Improper assembly, commissioning, operation,
maintenance and repair of the drive.
•
Operating the drive with defective, improperly
installed or malfunctioning safety and protection
devices.
•
Failure to comply with the notes and assembly
pre-requisites as specified in these assembly and
operating instructions.
•
Unauthorized constructional modifications to the drive
or to accessories such as casement bracket, frame
mounting brackets.
•
Cases of catastrophe caused by foreign objects and
Acts of God.
•
Wear
For possible warranty claims or required spare parts or
accessories please contact your nearest branch office or
the competent contact person at Aumüller Aumatic GmbH.
Details can be found on our website.
Liability
We reserve the right to change or adjust products at any
time without prior notice. Illustrations are subject to
change.
Although we take every care to ensure accuracy, we can-
not accept liability for the content of this document.
24
