audemat DIGIPLEXER 246 User Manual Download

Page: 85 / 93

Digiplexer 246 v2.5.x User Manual – 11/2010

Page 85

Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –

[email protected]

–

www.audemat.com

A.2.

Upgrade to 2 or 4 bands

First contact the sales department to get a copy of the CD containing the upgrade files. Follow then
the procedure:

Note: file names vary whether the upgrade is in 2 or 4 bands (number symbolized by

in file names

below)

1. Insert the Audemat CD-Rom; the following screen

will appear :

2. Right mouse click on “License” to save the target

‘

license FM

.lic

’ and on “Process” to save the

target ‘

Process FM

.s4s

’ on your PC.

3.  Open the Digiplexer Sound Process application.
4.  Connect to the equipment you wish to upgrade
5.  Click on the “Setup” button.

6. Click on “Advanced” and “Upgrade / Licenses”.
7. Click on the “Load License” button

(1)

8. Select the previously saved ‘

license FM

.lic

’ file, and open it.

9. Click on the “Upgrade Process” button

(2)

10. Select the previously saved ‘

Process FM

.s4s

’ file, and open it.

11. Wait for a few seconds: a message will be displayed to indicate the upgrade process is

validated.

12. Click on ‘OK’ to restart the application in 2- or 4-band mode.

A new logo shows the process has been successfully upgraded:

Summary of Contents for DIGIPLEXER 246






























































































Search results

Summary of Contents for DIGIPLEXER 246

Reviews:

Related manuals for DIGIPLEXER 246

Brands by name

Popular brands

audemat DIGIPLEXER 246, User Manual

Search results

Summary of Contents for DIGIPLEXER 246

Reviews:

Related manuals for DIGIPLEXER 246

Brands by name

Popular brands