Digiplexer 246 v2.5.x User Manual – 11/2010
Page 66
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
–
www.audemat.com
7.5.
UECP
7.5.
UECP
Select the corresponding tab.
Select the corresponding tab.
L
A DSN can only be configured in UECP if it is not the current DSN. To send a configuration
requires switching to another DSN; it is therefore necessary that at least 2 DSN exist for it to
work. See section 8.2.1 to create a new DSN.
L
A DSN can only be configured in UECP if it is not the current DSN. To send a configuration
requires switching to another DSN; it is therefore necessary that at least 2 DSN exist for it to
work. See section 8.2.1 to create a new DSN.
¾
UECP Addresses
(1)
Only one address is available without the Full RDS.
¾
Port configuration selection
(2)
You may create up to 6 configurations, but should not associate 2 configurations to a single port for
only the 1
st
configuration would be taken into account. To select a configuration, click on its name; the
selected configuration is on a green background.
Site address for the Digiplexer
Encoder address for the Digiplexer
1
2
4
3
