audemat DIGIPLEXER 246 Page 7 User Manual Download

Page: 7 / 93

Digiplexer 246 v2.5.x User Manual – 11/2010

Page 7

Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –

[email protected]

–

www.audemat.com

2. PRODUCT PRESENTATION

2.1.

List of accessories

The following are included with the Digiplexer 246:

•

1 power supply cable, or 2 with the “Redundant Power Supply” option 1 or 2

power supply cables

•

1 crossed network cable (B)

•

1 dust filter

•

Fuses

•

1 box including 1 CD-Rom, 1 quick start, 1 I/O configuration notice, 1 sticker: #2

for a 2-band Digiplexer 246 or #4 for a 4-band Digiplexer 246, 1 quality control
form.

2.2.

Front panel

2.3.

Rear panel

With FM Mod Amplifier option and Redundant Power Supply option.

Summary of Contents for DIGIPLEXER 246






























































































Search results

Summary of Contents for DIGIPLEXER 246

Reviews:

Related manuals for DIGIPLEXER 246

Brands by name

Popular brands

audemat DIGIPLEXER 246, User Manual

Search results

Summary of Contents for DIGIPLEXER 246

Reviews:

Related manuals for DIGIPLEXER 246

Brands by name

Popular brands