manualshive.com logo in svg

audemat DIGIPLEXER 246, User Manual

Share
Download
audemat DIGIPLEXER 246 User Manual Download Page 15

Digiplexer 246 v2.5.x User Manual – 11/2010 

 

 

Page 15 

Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France) 
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –

 

[email protected]

 – 

www.audemat.com

 

 

5.  Click on “Application portal installer”, select "Open" to install directly the installation portal or 

"Save" to install from the hard drive (recommended option). Once saved, launch the installer and 
follow the wizard’s instructions. 

 

6.  The installation portal will appear: 

 

7.  Click on “Install applications” to start 

installing all the applications for the 
Digiplexer 246: 

>

 

Radio all in one

, main application: 

RDS application, audio backup, 
transmitter configuration and system 
configuration. 

>

 

Digiplexer Sound Process

: sound 

processing and input management 
application, 

>

 

ScriptEasy:

 remote control functions

 

>

 

MasterView

: end-user viewing tool.

 

 

8.  Follow the wizard’s instructions. 

 

9.  To launch one of the applications use desktop shortcuts or go to ‘Start’ 

Æ

 ‘Programs’ 

Æ

 ‘Audemat’ 

Æ

 ‘Radio all in one’. 

Note: the Digiplexer Sound Process application can be launched from the 

Radio all in one application

. 

 

10.  If Windows Firewall is activated, add these applications to the list of approved applications.  

Summary of Contents for DIGIPLEXER 246






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands