Digiplexer 246 v2.5.x User Manual – 11/2010
Page 33
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
–
www.audemat.com
¾
To configure the unit as a router on a local network:
¾
To configure the unit as a router on a local network:
This function allows a user to communicate with all of the equipment on the local network shared by
the Digiplexer (Ethernet) from a PC connected to the Digiplexer by modem (PPP).
This function allows a user to communicate with all of the equipment on the local network shared by
the Digiplexer (Ethernet) from a PC connected to the Digiplexer by modem (PPP).
To configure this function, select “Enabled” on the “Router mode” line.
To configure this function, select “Enabled” on the “Router mode” line.
The input and output interfaces of the router can be configured by the options « Public interface »
(Input) and « Private Interface » (output).
Once the configuration is done, lock it in by clicking on “update”. Then click the “Activate new
configuration” button at the top of the page.
L
Click the “Activate new configuration” button every time a section is modified.
