Digiplexer 246 v2.5.x User Manual – 11/2010
Page 12
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
–
www.audemat.com
1
The 3 dB alarm is triggered on threshold overshoot as set on the transmitter page (see section 9).
This alarm indicates a problem with the amplifier or at the output. Check the antenna and cables which
can be unplugged or defective.
1
The 3 dB alarm is triggered on threshold overshoot as set on the transmitter page (see section 9).
This alarm indicates a problem with the amplifier or at the output. Check the antenna and cables which
can be unplugged or defective.
2
The VSWR alarm is triggered on threshold overshoot as set on the transmitter page (see section 9)
or when the unit goes into hardware protection mode when the VSWR is too high. This alarm indicates
a problem with the amplifier or at the output. Check the antenna and cables which can be unplugged
or defective.
2
The VSWR alarm is triggered on threshold overshoot as set on the transmitter page (see section 9)
or when the unit goes into hardware protection mode when the VSWR is too high. This alarm indicates
a problem with the amplifier or at the output. Check the antenna and cables which can be unplugged
or defective.
3
One of the PSU is not working. Check the main supply.
3
One of the PSU is not working. Check the main supply.
4
If the Warning LED blinks when the main power is back on, it indicates that the unit is powered by the
UPS (“Redundant Power Supply" option) but has not started yet. Simply use the “Reset” button on
the front panel to restart the unit.
4
If the Warning LED blinks when the main power is back on, it indicates that the unit is powered by the
UPS (“Redundant Power Supply" option) but has not started yet. Simply use the “Reset” button on
the front panel to restart the unit.
If the Warning LED is on, please contact the support department.
If the Warning LED is on, please contact the support department.
3.5.
Configuration using the front panel application
3.5.
Configuration using the front panel application
The front panel screen gives access to the Digiplexer 246’s
various applications; however, it is first used to configure the
unit.
The front panel screen gives access to the Digiplexer 246’s
various applications; however, it is first used to configure the
unit.
1. The front panel screen displays the status page which
gives an overview of the main functions (transmission,
RDS, audio backup…).
1. The front panel screen displays the status page which
gives an overview of the main functions (transmission,
RDS, audio backup…).
2. In order to be able to configure the Digiplexer 246,
establish the connection
by touching the last icon with
the stylus.
2. In order to be able to configure the Digiplexer 246,
establish the connection
by touching the last icon with
the stylus.
3. Default login and password are “
Admin
” / “
admin
”
(case sensitive).
When the cursor is in a text box, a keyboard
automatically appears. Enter the value and touch
ENTER to validate and hide the keyboard. Additional
characters keyboards are available with the <> key.
You may also connect in local mode for maintenance
purposes (default password: 1234). Remote connection
is then deactivated.
4. Once connected, the RDS application is displayed.
Default language is English.
5. Should you wish to switch to French, touch the System
icon.
