manualshive.com logo in svg

audemat DIGIPLEXER 246, User Manual

Share
Download
audemat DIGIPLEXER 246 User Manual Download Page 50

Digiplexer 246 v2.5.x User Manual – 11/2010 

 

 

Page 50 

Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France) 
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –

 

[email protected]

 – 

www.audemat.com

 

7.2.2. PSN management 

In Full RDS, 9 EON PSN may be added to the principal PSN. 

 

▪

 

 

Î

 main PSN. 

▪

 

 

Î

deactivated EON PSN  

▪

 

 

Î

 activated EON PSN. 

 

 

To add a PSN, right-click (remote application) or 
using the stylus, touch twice (front panel application) 
the DSN of your choice, and select ‘Add PSN’. 

 

Note: in the basic RDS version, you can have up 
to 2 DSN, with only one Main PSN. 

 

To copy an existing PSN, right-click (remote 
application) or using the stylus, touch twice (front 
panel application) the PSN of your choice, and select 
‘Copy’. 

 

 

 

Then, right-click (remote application) or using the 
stylus, touch twice (front panel application) the DSN 
of your choice, and select ’Paste as new…’ 

 

 

 

 

To delete a EON PSN, right-click (remote 
application) or using the stylus, touch twice (front 
panel application) the PSN to delete, and select 
Delete.  

Note: the main PSN cannot be deleted.

 

 

 

Summary of Contents for DIGIPLEXER 246






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands