ATX VersAtive Pro Operation Manual Download Page 55

Page: 55 / 58

CHAPTER 7: MKIP SYSTEM SHELL

VersAtive

Pro Enhanced – Operation Manual

7-9

5. Choose the geographic region for the time zone of the Device, Figure 7-27, then click

6. Choose the local region of the Device, Figure 7-28. Click

7. Time will be automatically updated from the defined server.

7.10 Menu - Restart

Shutdown and restart the server from this option.

7.11 Menu - Shutdown

Shutdown the server from this option. The server will not restart.

7.12 Menu - Authentication Mode

Local Authentication

Only GUI authentication with username and password is supported.
In this mode the User name and the Password are required. (Both the Apache2 username/password and mkip password).

Figure 7-27: Chose Geographic Area

Figure 7-28: Choose Local Region

Summary of Contents for VersAtive Pro



























































Search results

Summary of Contents for VersAtive Pro

Reviews:

Related manuals for VersAtive Pro

Brands by name

Popular brands

ATX VersAtive Pro, Operation Manual

Search results

Summary of Contents for VersAtive Pro

Reviews:

Related manuals for VersAtive Pro

Brands by name

Popular brands