CHAPTER 7: MKIP SYSTEM SHELL
VersAtive
®
Pro Enhanced – Operation Manual
7-3
2. Click or select
OK
to open the information window, Figure 7-4.
3. Click OK again to return to the
System Configuration Settings
Menu.
7.5 Menu - Set Network.
Set all physical Ethernet network IP addresses here (except for eth0 which is only set to default IP address from MKIP. Other
settings for eth0 must be set from the GUI).
NOTE:
For eth0 settings, only the GUI may be used to set eth0 IP parameters. MKIP may only
be used to set eth0 to default IP address of 192.168.0.23.
Setting the Management IP address
1.
Select
Set Network,
2. Click
OK
to open the Network Configuration Settings page, Figure 7-6.
3. The eth0 network is selected; click
OK
to set the eth0 IP Address (the Management port) or arrow down to select
another port. Setting the network is a series of pages so click
OK
each time to proceed to the next page in the series.
Figure 7-4: Display System Information
Figure 7-5: Set Network
Figure 7-6: Choose Network
