ATTO Technology ATTO FibreBridge 2350C, Installation And Operation Manual

Page: 92 / 109

i
ATTO Technology Inc. FibreBridge Installation and Operation Manual
Appendix A Mapping command examples
AutoMap, RouteXxxx and AddressMap commands map devices so that they may be recognized by the
FibreBridge. These commands are not available as described for the FibreBridge 2400. Refer to
Logical
Unit addressing for FB2400 only
on page 73.
AutoMap
The AutoMap command is unavailable in AddressMap C mode.
RouteDisplay
You may request information about currently mapped routes using the
RouteDisplay
CLI command.
RouteXxxxx commands
Following are samples of the RouteXxxxx command interaction showing actual commands and their
output to the Services port.
Ready.
SCSIPortList
3
;SCSI Port Port Status
0 O.K.
1 Disabled
Ready.
FcPortList
2
;Fibre Port Port Status
0 O.K.
Ready.
set RouteOffline 0 3
Ready.
get RouteOffline 0 3
;fp fl sb st sl On/Offline
0 3 0 0 0 Offline
Ready.
RouteChange 0 3 1 0 0
AutoMap Distributes maps across all Fibre Channel ports.
AutoMap [fp] Distributes maps across the named Fibre Channel port(s)
RouteDisplay Displays all current maps
RouteDisplay [fp] Displays all maps for the specified FC port
RouteDisplay [status] Displays all maps with a given route status
RouteDisplay [[fp] [fl]] Displays the current map of fp & fl.
RouteDisplay [[fp]
[status]] Displays all maps for a given Fibre Channel port with a named route
status
Valid status values Online
Offline
Unavailable
Available
Mapped
Unmapped
FibreBridge
All