Atosa ATCO-513B-1, Operating Instructions Manual

Page: 28 / 33

- 26 -
who are experienced in such work, familiar with all precautions required, and
have complied with all requirements of state and local authorities having
jurisdiction.
ADJUSTMENTS
Quite often malfunctions, which are attributed to defects, may be repaired by
adjusting certain parts rather than replacing them.
DOOR ADJUSTMENT
The gas-fired convection oven have doors that are inter-connected so they
operate simultaneously by means of a chain and turnbuckle assembly. The
doors are properly adjusted and inspected before the oven leaves the factory.
However, from time to time it may become necessary to readjust the doors
after usage. If you find it necessary to adjust the doors for proper operation, the
chain and turnbuckle assembly is located behind the panel that is over the
doors. It is best to adjust turnbuckles while the door is in an unlatched position.