Atosa ATCO-513B-1, Operating Instructions Manual

Page: 11 / 33

- 9 -
Please contact your local agent if you have any questions;
Such stove shall be installed on the horizontal, solid, anti-skidding and
incombustible floor, and at the water-proof working area with sufficient
light and far away from the children and customers;
The installation position is a well-ventilated place in accordance with the
local regulations;
The charbroiled must be installed under the matched cooking fume
exhauster according to the local regulations;
Important: Installation and ventilation laws, and codes are very
different, you should state and comply with all codes of the National
Fire Protection Association Inc when it comes to requirements for
installation of equipment;
Hoist the product using a forklift to some height, fix the supporting leg
to 3 corresponding holes of the baseplate using a φ8 flat gasket, φ8 spring
gasket and M8×25 screws and screw such screws with a spanner. If a castor
is installed, its screws shall be screwed into the corresponding hole of the
baseplate, as shown in Figure below.