ATN PIAF 10E 2018, Safety And Maintenance Manual

Page: 77 / 81

SAFETY AND MAINTENANCE MANUAL
1NO0055UK-00
PIAF 10 E
77
3.9. GENERAL INSPECTION CHECKLIST
COMPONENTS INSPECTION / VERIFICATION / MAINTENANCE INTERVALS
D = Daily / W = Weekly / M = Monthly / Y = Yearly
Battery Battery charge D
Electrolyte level W
Electrolyte density (after the charge) M
Battery and terminal cleaning M
Hydraulic oil Oil level W
Filter replacement 50h THEN
250H
Hydraulic system Leak check D
Hose fittings torque control D
Control of the hose condition (shocks, friction) D
Breakdown control panel check D
Mast cylinder Leak check D
Check the absence of scratches on the rod M
Lowering test M
Pumps Bolt tightening W
Leak check D
Electrical components Control of the good working condition of the horn D
Machine switches to slow speed when elevated D
Chain slack sensor control D
Overload sensor control D
Tilt sensor control D
Platform General condition (shocks) M
Bolts and fixations M
Welds of railings W
General structure Light mast lubrication W
General condition of the mast structure W
Welds general condition (cracks, rust…)
W
Chassis Wheel general condition W
Safety decals General condition and presence of the instruction and safety decals M
Turntable Turntable lubrication 100H
Torque of the fixation bolts M
Weld condition control W
Steering Steering pivot lubrication if necessary M
Check the thickness of the washers is sufficient. M
Leak check on cylinder D