ATN PIAF 10E 2018, Safety And Maintenance Manual

Page: 25 / 81

SAFETY AND MAINTENANCE MANUAL
1NO0055UK-00
PIAF 10 E
25
DANGER
FAILURE TO CORRECTLY MAINTAIN AND CHECK THIS MACHINE COULD RESULT IN
DEATH OR SERIOUS INJURIES.
THIS MACHINE MUST NOT BE USED IF IT IS NOT IN PERFECT WORKING
CONDITION.
Before use, careful inspection and operating check are recommended to ensure that the machine
is in perfect working order.
Do not use the machine if it is damaged or has an operating defect.
Depending on national or local regulations, the machine must be submitted to periodic verifications
and testing.
3.1 INSPECTION BEFORE START UP
1- Make sure that there are no oil leaks. Check the machine's general cleanliness (slippery
substances on the platform floor).
2- Inspect the machine's structure to detect any damaged parts, cracked welds or any other
anomaly.
3- Check the presence and legibility of the safety stickers. Clean or replace any illegible
stickers.
4- Check that there is a copy of the operator and safety manual in the working platform's
document holder.
5- Carry out the inspection tour described below.
6- Carry out the operating checks described below
3.2 INSPECTION TOUR
Check each element in the list below in order. For each element, in addition to the criteria
mentioned, check that no parts are loose or missing, that the elements are correctly attached and
that they have no leaks or visible damage.
1- Electric cables
– Cable run and tightening of the battery connections.
2- Steering cylinder - Steering bar.
3- Front wheel motors - Wheel pivot pins: No screws missing - Screws correctly tightened.
4- Wheels: Tyres in good condition
– No wheel nuts missing – Wheels correctly tightened
5- Hydraulic tank compartment: No oil leak on the hydraulic manifolds or tank
– Connectors on
the hydraulic control valves and sensors correctly installed / connected
– No damaged
electric cable
– Hydraulic oil level correct.