ATN PIAF 10E 2018, Safety And Maintenance Manual

Page: 31 / 81

SAFETY AND MAINTENANCE MANUAL
1NO0055UK-00
PIAF 10 E
31
WARNING
DO NOT WAIT UNTIL THE BATTERY IS 80% DISCHARGED TO RECHARGE IT.
HOWEVER APPROXIMATELY ONCE A MONTH, IT IS RECOMMENDED TO
DISCHARGE IT TO 80%. THE BATTERY SHOULD BE FULLY CHARGED TO
PRESERVE ITS SERVICE LIFE.
THE ONBOARD CHARGER WILL NOT BE ABLE TO RECHARGE THE BATTERIES IF
THEY ARE DISCHARGED BEYOND 80%.
7- Overload indicator light :
This
light flashes when the platform’s load capacity has been exceeded.
-NOTE-
The machine stops when this indicator lights up. You must unload the
basket to restore the machine
’s functions
.
8- Chain Slack indicator light:
Warns the operator of a problem during the lowering of the mobile mast
sections.
- NOTE -
The mast lowering movement stops when this indicator lights up. To
restore the functions, it is necessary to first analyse and solve the
problem. The mast must then be raised
.
9- Validation indicator light :
This light is on when the enable pedal is activated and a movement can be
controlled.
10- Maintenance / System fault indicator light:
This light flashes slowly when a maintenance / pre-scheduled maintenance
operation is required.
The light is on steady if there is a fault in the control system.
11- Battery charge indicator light:
This light comes on when the battery has 20% of its charge remaining. The
operator must return the machine to its charging station. With only 5% charge
remaining, the indicator flashes and all the movements switch to slow speed.
4.1.3 ENABLE PEDAL
The enable pedal must be kept actuated for the elevation,
swinging and drive movements.