AT-UHD-SW-510W
42
The Web GUI
Volume / Mute
This feature will be implemented in a future release of firmware.
Setting
Description
Audio Out
This feature not yet implemented.
RS-232
This feature not yet implemented.
IP
This feature not yet implemented.
Relay Settings
Advanced Settings
Enable Momentary Relay
Click this check box to enable the
RELAY
port on the AT-UHD-SW-510W. This port allows the control of screens,
curtains, and other devices. This feature is enabled by default. Use a 48 V DC relay with no more than 1 A current
draw. Refer to
Relay Connector (page 12)
for wiring information.
Lock Power Button
Click this check box to lock the
DISPLAY
button on the front panel, preventing accidental power-on or power-off in a
rack environment or other setting. Click this check box again to deselect it and unlock the
DISPLAY
button.