Operating instructions SunCool
TM
- 8 -
2
Scope of delivery and equipment
Figure 2
Figure 1
2.1
Scope of delivery
The SunCool
TM
units are available in four different versions.
The supply voltages of the chillers are classified in accor-
dance with the weathering units SUNTEST CPS /CPS+
and SUNTEST XLS / XLS+.
After unpacking the unit, check to see if the supply voltage
complies with the voltage on the nameplate of the unit.
For SUNTEST CPS / CPS+:
SunCool
TM
with 115V / 60Hz supply voltage
SunCool
TM
with 230V / 50Hz supply voltage
For SUNTEST XLS / XLS+:
SunCool
TM
with 115V / 60Hz supply voltage
SunCool
TM
with 230V / 50Hz supply voltage
Connection line:
The connection line is used to control the SunCool
TM
by
using the program control of the SUNTEST CPS+ or SUN-
TEST XLS+.
Dummy plug:
The SunCool
TM
is equipped with a dummy plug to be used
if the SunCool
TM
is operated with the SUNTEST CPS or
SUNTEST XLS (without program control).
PVC adhesive tape:
PVC adhesive tape is used to attach the connector to the
connection socket and pipe bend.
2.2
Optional equipment
The optional connection set connects the SunCool
TM
to
the SUNTEST weathering unit.
For each SUNTEST version, a unit-specific connection set
is available that may be routed to the right or downward:
•
A,
connection set SUNTEST CPS / CPS+
•
B,
connection set SUNTEST XLS / XLS+
Scope of delivery for the connection set
:
1 connection socket SUNTEST unit,
1
.
1 pipe bend 90°,
2
.
1 connector, 30 cm,
3
.
Insulation pads for SUNTEST weathering units:
Insulation pads
4
prevent the formation of condensate on
the housing of the SUNTEST unit.
OPERATION
OFF
ON
THERMOSTAT
WAIT 3 MINUTES BEFORE RESTARTING
3
1
5
7
9
11
COOLER
FAN SPEED
LOW
HIGH
OPERATION
THERMOSTAT
0
C
OO
L
d
d
1
9
8
7
6
5
4
3
2
C
O
O
L
E
R
BEFORE RESTARTING
WAIT THREE MINUTES
F
A
N
SunCool
TM
230 V, 50Hz
SunCool
TM
115 V, 60Hz
Connection line
Dummy plug
PVC adhesive tape
1
A
B
2
3
4
4
Connection socket SunCool
TM
1
Connection socket
2
Pipe bend
3
Connector
4
Insulation pads
