Atlantis Land I-Storm A02-RA, Command Reference Manual

Page: 27 / 112

4. BUN Console commands
4.1 Introduction
4.1.1 Scope
A description is provided of the use of console commands.
No information on implementing additional commands is given in this chapter:
implementers of new BUN devices may provide access to diagnostic or status
information by implementing attributes to handle these tasks. The standard BUN
console commands may then be used to display or change these settings.
All BUN process commands may be issued by posting TELL messages to the BUN
process. The BUN process does not support the used of STDIN command streams.
(Refer to
tell <process> … on page 19 for more information on the TELL command
interface.)
Command parsing is case insensitive. White-space may be used to separate distinct
arguments. Any prefix of the string
bun to the command line is ignored.
4.1.2 Build Inclusion
The full BUN console command set is included with all builds that include the BUN
package.
To include the BUN package, add the following directive to the ATMOS SYSTEM
file:
package bun
The directive may be placed anywhere in the SYSTEM file after the inclusion of the
core package
(core.pk g).
4.1.3 Compile Time Configuration
Most BUN commands are available irrespective of the compilation options. This
section describes exceptions to this rule.
build
The build command displays the compile-time options, and so will change according
to what compilation options are used…
Any compile option that affects BUN operation should be displayed by this
command.
4.1.4 Command arguments
devicename
The name of a device.
Device names are either implicit (ie.: provided from the compiled-in device code) or