dhcpserver reset
6.4.2 Description
This command prompts the server to do a
warm
reset of itself. This has the effect of
bringing the server back up
as if
the system had been rebooted, except that the lease
database is preserved in SDRAM between resets.
Please note, however, you should still save the configuration file to FLASH if you
want the configuration to be preserved upon rebooting the whole system.
The advantage of this command is that it allows configuration changes that have
been confirmed (using
config confir
m) to take effect immediately, rather than having
to do a
flashfs update
and
restar
t.
This command is also convenient for defining subnet topologies for IP interfaces that
have been added dynamically.
6.4.3 Example
bd3000>
dhcpserver reset
dhcpserver: Reset request acknowledged. Reset imminent.
6.5 status
6.5.1 Syntax
dhcpserver status
6.5.2 Description
This command provides a summary of all leases known to the server on each
interface in turn. It also shows remaining available IP addresses (i.e. those with no
specified lease time, or client identifier).
6.5.3 Example
bd3000>
dhcpserver status
DHCP Server Lease Status
Interface “ethernet”
IP address | Client UID/hw addr | Expiry
---------------+-----------------------+-----------------
192.168.219.1 | 01:00:20:af:20:6f:59 | 11 hours
192.168.219.2 | 01:00:20:af:11:2a:ac | 8 hours
192.168.219.3 | Myclient | 140 seconds
192.168.219.4 | 00:20:af:20:00:2b | 2 days
192.168.219.5 | <unknown> | Never
192.168.219.6 | <unknown> | Never
192.168.219.7 | <unknown> | Never
Summary of Contents for I-Storm A02-RA
