mymachine>
ip route add default 0.0.0.0 192.168.2.3 0:0:0:0
mymachine>
ip route add testnet1 192.168.101.0 192.168.2.34
mymachine>
ip route add testnet2 192.168.102.0 192.168.2.34 ff:ff:ff:0 1 60
mymachine>
ip route
route add testnet2 192.168.102.0 192.168.2.34 ff:ff:ff:00 1 # MAN 58s/1m via
ether *
route add testnet1 192.168.101.0 192.168.2.34 ff:ff:ff:00 1 # MAN via
ether
route add default 0.0.0.0 192.168.2.3 00:00:00:00 1 # MAN via
ether
10.45 routeflush
10.45.1Syntax
routeflush [<i/f>] [all]
10.45.2Description
Removes routes from the route table. If an interface
(<i/f
>) is specified, only routes
through the named interface are removed. If
all
is not specified, only host routes
(those with a mask of
ff:ff:ff:f
f) are removed.
The
routeflush
command is
hidde
n, not shown by
ip hel
p.
Configuration saving saves this information.
10.45.3Example
mymachine>
ip routeflush ether all
mymachine>
ip routeflush
10.46 routes
10.46.1Syntax
routes
10.46.2Description
Lists routes. (The same as
rout
e, with no parameters.)
10.46.3Example
mymachine>
ip routes
route add testnet1 192.168.101.0 192.168.2.34 ff:ff:ff:00 1 # MAN via
ether
route add default 0.0.0.0 192.168.2.3 00:00:00:00 1 # MAN via
ether
10.47 snmp
Summary of Contents for I-Storm A02-RA
