snmp 161/UDP
tftp 69/UDP
telnet 23/TCP
mymachine>
ip config save
Updating flash filing system ...
done
ip: configuration saved
10.7 device
10.7.1 Syntax
device [list]
device add <i/f> <type> [<file>] [mtu <size>] [<IP address>]
device delete <i/f>
device flush
10.7.2 Description
Displays the interfaces that IP is configured to use
(device lis
t), or adds an interface
to the configuration
(device ad
d), or deletes an interface
(device delet
e), or deletes all
interfaces
(device flus
h), from the configuration.
The options used with this command are described below:
•
<i/f>
is an arbitrary label for the interface, which is used in referring to it in
subsequent commands. (It is often chosen to be the same as
<type
>, though this is
perhaps slightly confusing.)
•
<type>
specifies the class of interface: Ethernet-
lik
e, IP-over-ATM, PPTP or
loopback.
The supported values for
<type>
are shown in the table below:
Class
<Type>
Default file
Ethernet
ether
value of
ETHERNET_DEVICE_NAME
(defined in system file)
flane
//lec1
bridge
//bridge
IP-over-ATM
atm
//q93b
atmpvc
//bun
//atm
Point-to-point
PTP
None
PPP
//ppp/DEVICE=1
Loopback
loop
-
A default file for the
Ethernet
class can be defined in the system file, as follows:
Summary of Contents for I-Storm A02-RA
