10.31.1Syntax
restart
10.31.2Description
Reboots the system.
This command is deprecated. To reboot the system, use the
restart
command from
the ATMOS console.
10.31.3Example
mymachine>
ip restart
10.32 rip accept
10.32.1Syntax
rip accept [all|<i/f>] [none|<version>*]
10.32.2Description
Controls for which version or versions of RIP (RIP version 1, RFC 1058, or RIP
version 2, RFC 1723) ATMOS TCP/IP will accept incoming information on each
interface.
Configuration saving saves this information.
By default, both RIP versions are accepted on all interfaces
(rip accept all 1
2).
10.32.3Example
mymachine>
ip rip accept all 1 2
mymachine>
ip rip accept ether 2
mymachine>
ip rip allowed
rip send ether none
rip send flane none
rip accept ether 2
rip accept flane 1 2
10.32.4See also
rip allowed
on page 194,
rip send
on page 203.
10.33 rip allowed
10.33.1Syntax
rip allowed
10.33.2Description
Displays the RIP versions that will be accepted and sent on each interface.
10.33.3Example
Summary of Contents for I-Storm A02-RA
