device ether ether //edd mtu 1500 192.168.2.1
device flane ether //lec1 mtu 1500 192.168.55.1
# DISABLED
10.9 enable
10.9.1 Syntax
enable [<i/f> [mtu <size>] [<IP address>]]
10.9.2 Description
Enables all interfaces, or just a specified interface. Can also be used to set the MTU
and IP address on an interface when enabling it (or change them on an interface that
is already enabled); see
device
on page 162 for details on the interfaces.
Configuration saving saves the MTU and IP addresses, but not the disabled/enabled
state.
10.9.3 Example
mymachine>
ip enable flane 192.168.56.3
ip/flane: IP address 192.168.56.3
mymachine>
ip device
# type dev file IP address
device ether ether //edd mtu 1500 192.168.2.1
device flane ether //lec1 mtu 1500 192.168.56.3
10.10 errors
10.10.1Syntax
errors
10.10.2Description
Turns on tracing of various unusual events; equivalent to
trace error
s.
The
errors
command is
hidde
n, not shown by
ip hel
p.
10.10.3Example
mymachine>
ip errors
ip: currently tracing errors
10.11 etherfiles
10.11.1Syntax
etherfiles
10.11.2Description
Lists the file names for the underlying devices for all Ethernet-like interfaces.
Summary of Contents for I-Storm A02-RA
