manualshive.com logo in svg

Atlantis Land I-Storm A02-RA, Command Reference Manual

Share
Download
Atlantis Land I-Storm A02-RA Command Reference Manual Download Page 52

nat fragments <i/f name> 

7.11.2 Description 

This command is only available in debug builds. 

nat fragments 

prints information on the queues in which NAT holds fragmented IP 

datagrams, displaying the IP datagram identifier, the number of fragments queued 
and a NAT session pointer for each queue. This command is provided for debug 
purposes only. 

7.11.3 Example 

bd3000> 

nat fragments ether 

7.12 hashtable 

7.12.1 Syntax 

nat hashtable <i/f name> 

7.12.2 Description 

This command is only available in debug builds. 

nat hashtable 

prints the number of sessions linked to each entry in the hashtable used 

to look up outgoing packet on the given interface. This command is provided for 
debug purposes only. 

7.12.3 Example 

bd3000> 

nat hashtable ethernet 

#        Linked  sessions 

0        1 

1        0 

2        1 

3        2 

 

 

 

 

 

 

8. PPP Console commands 

 
This chapter describes the PPP Console commands.

 

 

Summary of Contents for I-Storm A02-RA

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands