Atlantis Land I-Storm A02-RA, Command Reference Manual

Page: 89 / 112

provided the protocol type (UDP or TCP) is appropriate. They are also displayed in
place of port numbers, when a suitable mapping exists. The Damson interface
(described in the
ATMOS TCP/IP Functional Specification, DO-007285-P S) allows
other processes to query the mapping.
<protocol> should be either UDP or TC P; it can be omitted, but that is not very
useful.
For
portname rea d, the file is in the same format as //isfs/services (described in the
ATMOS TCP/IP Functional Specification, DO-007285-P S), which is the same as the
output from portname lis t.
The portname command is hidde n, not shown by ip hel p.
Configuration saving saves this information.
10.28.3Example
mymachine>
ip portname flush
mymachine>
ip portname add someport 105/tcp
mymachine>
ip portname list
someport 105/TCP
mymachine>
ip portname read //isfs/services
mymachine>
ip portname list
router 520/UDP
snmp 161/UDP
tftp 69/UDP
telnet 23/TCP
someport 105/TCP
10.29 protocols
10.29.1Syntax
protocols
10.29.2Description
Displays information on the protocols supported by ATMOS TCP/IP. The output
will always be the same for a given version of ATMOS TCP/IP.
The
protocols command is hidde n, not shown by ip hel p.
10.29.3Example
mymachine>
ip protocols
RAW - IP ID -1, CL protocol
ICMP - IP ID 1, CL protocol
TCP - IP ID 6, CO protocol
UDP - IP ID 17, CL protocol