ATI Technologies SmartTachSmartTach, User Manual

Page: 98 / 110

APPENDICES
Page A-2 SmartTach Operating Manual
Parameter Groups and Default Values
Parameter
Group
Parameter ID
and Description
Default
Value
Setup!
00 Measurement Parameter EngSp
01 Displayed Engineering Units RPM
02 Pulses/Patterns Per Cam/Dyno Rev 1
03 Pulses Per Pattern 1
04 Engineering Unit Conversion Factor N/A
05 Engineering Conversion Units N/A
06 Input Signal Conditioning Select SPK
07 Measurement Low-Pass Filter 0
08 Multi-Strike Filter Off
09 Pulses per Measurement 1
SpkInp
10 Spark Input Threshold Level 2.00
11 Spark Input Delay Period 3.0
TrgInp 20 Trigger Input Level AutoT
21 Trigger Input Polarity Neg
22 Trigger Input Attenuator AtOff
23 Trigger Input Internal 5V Pull-Up PuOff
24 Trigger Input Threshold Level Auto
25 Trigger input Hystersis Level 0.20
AnlOut
30 Analog Output Mode Norm
31 Analog Output Scaling 1000
32 Analog Output Offset 0
33 Analog Output Maximum Voltage Limit 10.00
34 Analog Output Minimum Voltage Limit
0.00
35 Analog Output Test Voltage 0.00
36 Analog Output Update Period 1
Range1 40 Range Output #1 Function Off
41 Range Output #1 Measurement
Condition
N>A
42 Range Output #1 Voltage Condition V>C
43 Range Output #1 "A" Value 0
44 Range Output #1 "B" Value 0
45 Range Output #1 "C" Value 0.00
46 Range Output #1 "D" Value 0.00
47 Range Output #1 Test State Off