ATI Technologies SmartTachSmartTach, User Manual

Page: 57 / 110

PARAMETERS
SmartTach Operating Manual Page 4-27
40, 50, 60 - Range Output Function
Parameter Group:
Range1 Range2 Range3
Parameter Code:
40 50 60
Options:
Off
- Output inactive
On
- Output always on(contacts closed)
if N
- Output is a function of the measured value
if V
- Output is a function of Aux. Input voltage.
ifN&V
- Output is on when the measurement condition “and” Aux.
voltage
condition are both true.
ifN+V
- Output is on when either the measurement condition “or”
Aux.
voltage condition are true.
Default:
Off
- Output inactive
Purpose: To select the type of functionality of the selected range output.
SmartTach provides three separately configurable Range Outputs.
The Range Outputs are isolated contact closures available at the
I/O connector.
How to Set: This parameter should be set based on the desired functionality.
Other parameters may need to be set for the outputs to function
properly; such as Measurement condition, Voltage Condition and
user variables A B C D.
Logic Table:
Setting
Measuremen
t Condition
Aux. Voltage
Condition
Range
Output State
Off Don’t Care Don’t Care Off
On Don’t Care Don’t Care On
if N False Don’t Care Off
True Don’t Care
On
if V Don’t Care False Off
Don’t Care True
On
ifN&V False False Off
False True Off
True False Off
True True
On
ifN+V False False Off
False True
On