ATI Technologies SmartTachSmartTach, User Manual

Page: 50 / 110

PARAMETERS
Page 4-20 SmartTach Operating Manual
30 - Analog Output Mode
Parameter Group:
AnlOut
Options:
Norm
- Track measured speed with filtering
Max
- Track maximum speed
Min
- Track minimum speed
Raw
- Track measured speed without any filtering
Default:
Norm
- Track measured speed with filtering
Purpose: This parameter is used to set the function of the analog output
voltage. The default is appropriate for most uses. In normal mode
the analog output voltage corresponds to the measured voltage
including any filtering.
How to Set: This parameter should be set in accordance with the functional
requirements of the device that the analog output is connected.
When in Max or Min mode the analog output corresponds to the
maximum or minimum measured speed. When connecting
SmartTach to a control system for engine/vehicle speed control,
normal(Norm) mode is recommended and Max and Min should not
be used.