ATI Technologies SmartTachSmartTach, User Manual

Page: 12 / 110

INTRODUCTION
Page 1-6 SmartTach Operating Manual
Important Safety Warnings
!"
NEVER WORK ON OR AROUND A RUNNING ENGINE.
!"
It is the responsibility of the installer of SmartTach to comply with the National
Electrical Code and any other applicable Federal, State, or local safety
codes.
!"
It is always better to spend extra time and care when installing the
SmartTach. This will avoid unnecessary wasted time and money correcting
the installation if the system does not function properly.
!"
Always route all wiring cables away from hot, sharp, or moving components
as well as ignition coils and spark plug wires. All cables should be carefully
and neatly fastened.
!"
When installing cables and sensors, any possible movement of the engine
should be taken into consideration. Always leave enough extra cable length
to accommodate for this movement.
!"
Always wear approved eye protection when working near engines,
machinery, and vehicles.
!"
When operating the SmartTach in a moving vehicle, a passenger should
perform all operating and data-taking tasks. The driver should always keep
his eyes on the road.