ATI Technologies SmartTachSmartTach, User Manual

Page: 107 / 110

INDEX
SmartTach Operating Manual Page I-3
Default values, A-2–A-3
Display, 4-37–4-38
Input monitor, 4-41–4-44
Loading stored, 4-45
Memory, 4-45–4-48
Range1, 4-27–4-34
Range2, 4-27–4-34
Range3, 4-27–4-34
Resetting, 4-47
Serial port, 4-39–4-40
Setup, 4-2–4-11
Spark input, 4-12–4-13
Storing, 4-46
Trigger input, 4-14–4-19
Power supply
Connections, 2-4
Connector pin-outs, A-5
Input monitor, 4-43
Specifications, 2-2
Pulse input
Connections, 2-3
Connector pin-outs, A-4
Pushbuttons
Configure mode, 3-4
measure mode, 5-3
R
Range output 1
40 - Function, 4-27
41 - Measurement condition, 4-28
42 - Voltage condition, 4-29
43 - “A” value, 4-30
44 - “B” value, 4-31
45 - “C” value, 4-32
46 - “D” value, 4-33
47 - Test state, 4-34
Range output 2
50 - Function, 4-27
51 - Measurement condition, 4-28
52 - Voltage condition, 4-29
53 - “A” value, 4-30
54 - “B” value, 4-31
55 - “C” value, 4-32
56 - “D” value, 4-33
57 - Test state, 4-34
Range output 3
60 - Function, 4-27
61 - Measurement condition, 4-28
62 - Voltage condition, 4-29
63 - “A” value, 4-30
64 - “B” value, 4-31
65 - “C” value, 4-32
66 - “D” value, 4-33
67 - Test state, 4-34
Range outputs
Connections, 2-6
Examples, 5-5–5-6
Parameters, 4-27–4-34.
See Range1 Range2
Range3
Using, 5-4–5-6
S
Serial
90 - Baud rate, 4-39
91 - Handshake, 4-40
Serial port. See Com port
Connections, 2-5
Parameters, 4-39–4-40.
See Serial
Setup
Parameters, 4-2–4-11. See Setup!
Setup!
00 - Measurement parameter, 4-2
01 - Displayed units, 4-3
02 - Patterns/pulses per rev, 4-4
03 - Pulses per pattern, 4-5
04 - Unit Conversion Factor, 4-6
05 - Conversion Units, 4-7
06 - Input signal conditioning, 4-8
07 - Measurement Low-pass filter, 4-9
08 - Multi-Strike filter, 4-10
09 - Pulses Per Measurement, 4-11
Spark input, 2-3
Parameters, 4-12–4-13. See SpkInp
SpkInp
10 - Spark input threshold, 4-12
11 - Spark input delay, 4-13
T
TachSensor
Connections, 2-4
Connector pin-outs, A-5
Description, A-6
Technical support, 1-3
TrgInp
20 - Trigger input level, 4-14
21 - Trigger input polarity, 4-15
22 - Trigger input attenuator, 4-16
23 - Trigger input pull-up, 4-17
24 - Trigger input threshold, 4-18
25 - Trigger input hysterisis, 4-19
Trigger input
Connections, 2-3
Monitor, 4-41
Parameters, 4-14–4-19.
See TrgInp
Troubleshooting, 6-2–6-5
Common problems, 6-2–6-4