ATI Technologies SmartTachSmartTach, User Manual

Page: 52 / 110

PARAMETERS
Page 4-22 SmartTach Operating Manual
32 - Analog Output Offset
Parameter Group:
AnlOut
Range: 0-9999
Increment: 1
Default: 0
Note: Decimal place may vary with units, significant digits remain the
same.
Purpose: This parameter is used to set the engineering units at zero-voltage
output value. This setting corresponds to the measured value for
which the analog output voltage will be 0 volts.
How to Set: This parameter should be set in accordance with the input
requirements of the device to which the analog output is
connected. The default setting of 0 degrees allows direct readout
of RPM from the analog output voltage (shifting the decimal point
right by three digits). This allows the use of a remote voltmeter to
display measured speed.