ATI Technologies SmartTachSmartTach, User Manual

Page: 25 / 110

CONFIGURATION
SmartTach Operating Manual Page 3-5
S m a r tT a c h
PULSE CONFIG
ENTER MODE
0 0 > E n g S p
Parameter Edit
Display: Parameter Id and Current Value.
A flashing
>
symbol indicates edit mode.
PULSE: Flashing (if pulses are being received)
CONFIG: On
: Scroll Parameter Value Down
: Scroll Parameter Value Up
ENTER: Accept New Value
MODE: Cancel Edit and Return to Parameter Select
Figure 3 - 3: Pushbutton Functions
Changing Parameters
This example describes a step-by-step procedure for setting the Input
Signal Conditioning parameter. This procedure assumes that power has
just been applied and no pushbuttons were depressed. Default starting
values for the parameters are also assumed.
1 2 5 0 r p m
Press
ENTER
Press
MOD
Press
MOD
Press
MOD
Parameter Group
Use Up and Down
arrows to scroll to the
> S e t u p ! <
Group
Parameter List
Use Up and Down
arrows to change
Parameter Number to
0 6 > S P K
Note: When scrolling through the
Parameter List the current value of the
displayed parameter will be shown.
Edit Parameter
Use Up and Down arrows to
change Parameter Value
0 6 > T R G
Accept new
Parameter Value
Cancel Edit and
use orignal value
Press
Enter
Press
Enter
Press
MOD
Measurement Display
Note:
The
>
Flashes
when in Edit mode.