Athena 1090 EVO, Translation Of Original Instructions, Page: 91 / 182

91
Rotation on itself towards the left
(counter-rotation)
Travel is enabled or disabled depending on the status of the travel approval light
located on the control panel. It provides the following information:
•
On: travel allowed up to a maximum height of 4.5 m platform floor,
proactive levelling active
•
Flashing: travel allowed up to a maximum height of 4.5 m platform floor,
proactive levelling active, but at the limit of the maximum height
allowed
•
Off: travel not allowed
WARNING: If you must drive up a slope, do not change direction when the
ground changes from flat to sloping. If this is absolutely necessary, perform the
manoeuvre gradually.
It is forbidden to climb on the tracks to attempt any operation that is not
allowed or to use the controls on the work platform.
It is forbidden to climb on the tracks when the machine is moving.