Athena 1090 EVO, Translation Of Original Instructions, Page: 88 / 182

88
4.2.2 Starting the current source
During operation with the INTERNAL COMBUSTION ENGINE, it is possible to turn
the selector (6) to the OUT 220V position. In this way, it will be possible to use
the 220V power in the outlet on the work platform (only for machines with
inverter).
4.2.3 Starting the electrical engine
To start the electrical engine and thus the related hydraulic pumps, first
connect a sufficiently long cable with three-pole socket that complies with
European standard IEC 309 (see photo below) to the socket located near the
access ladder.
The power supply characteristics of the electrical network must be compared
with the characteristics of the electrical engine installed.
Characteristics of the electrical power supply network:
•
Voltage: 230 v ± 10%
•
Frequency: 50 Hz
•
Grounding line working and equipped with a differential circuit breaker