Athena 1090 EVO, Translation Of Original Instructions, Page: 113 / 182

113
Warning: All maintenance operations must be performed as indicated in Chapter
2 Safety information . In particular, maintenance must only be carried out after
the emergency push-button has been pressed, the engine turned off and using
individual protective equipment and the extendible structure locking system.
Warning: Disconnect the machine from all power sources
Warning: It is mandatory to perform all MEWP movements required for
inspections/maintenance using the ground controls and without operators on the
work platform. When checking machine operation from the work platform, the
required movements must be performed as near to the ground as possible.
Note: Use of spurious spare parts, or parts that have not been approved by the
manufacturer voids the warranty and relieves ALMAC S.r.l. from all liability.
Note: Modifications or variations to the MEWP are forbidden unless authorized
by the manufacturer.
Note: All maintenance work that is not described in this manual must be
authorized by the manufacturer and must be performed by authorised
technicians.
Warning: Do not use the machine if one of its mechanical or hydraulic elements
or a control or safety device is faulty! Immediately notify an Almac Srl customer
assistance centre